Kompletan pregled
Screw-in RTD Temperature Probe with Form B Terminal Head (902020)
- For temperatures from -50 to +600 °C
- With interchangeable measuring insert
- As single or double RTD temperature probe
- Terminal head form B, BUZ, BUZH, BBK
- Available with transmitter
JUMO Etemp B - Screw-In RTD Temperature Probe with Form B Terminal Head for Standard Applications (902023)
- For temperatures from -50 to +400 °C
- With built-in measuring insert
- As single or double RTD temperature probe
- Terminal head form B or BUZ
- Available with transmitter
Screw-in RTD Temperature Probe with Form J Terminal Head (902030)
- For temperatures from -50 to +400 °C
- As single or double RTD temperature probe
- Available with transmitter
- Protection type IP65
JUMO VIBROtemp - Screw-In RTD Temperature Probe with Plug Connector (902040)
- For temperatures from -50 to +270 °C (for the short term up to 300 °C)
- Vibration-resistant construction
- Areas of application: commercial vehicles, construction and agricultural machinery, engines, compressors, and railway technology
- Different plug connectors; locked against contact
- Protection type up to IP67 / IP69 according to DIN EN 60529 (IP69K according to DIN 40050)
Screw-in RTD Temperature Probe with Connector According to DIN EN 175301 (902044)
- For temperatures from -50 to +260 °C
- Vibration-resistant construction
- Plug connector locked against contact, protection type IP65
- Available with transmitter
- GL approval for basic types 902044/20 and 902044/21
(max. insertion length 200 mm)
Screw-In RTD Temperature Probe with Connecting Cable (902050)
- For temperatures from -50 to +400 °C
- As single or double RTD temperature probe
- In two-wire, three-wire, or four-wire circuit
- Connecting cable PVC, silicone, PTFE, metal braiding
RTD Temperature Probe for Devices and Plants Tested According to DIN EN 14597 (902006)
- For heat conducting systems according to DIN 4754
- For temperatures of up to 700 °C
- As single, double, or triple RTD temperature probes
- For water, oil, or air
- For tested control and limitation devices
Screw-In Melt RTD Temperature Probe (902090)
- For temperatures from -50 to +400 °C
- Various probe tips available
- Protection tube and probe tip in stainless steel
- Ceramic insulated probe tip
- In two-wire circuit, three-wire circuit, or four-wire circuit
- For application in the plastics industry
Push-in RTD Temperature Probe with Form B Terminal Head (902120)
- For temperatures from -50 to +600 °C
- With interchangeable measuring insert
- As single or double RTD temperature probe
- Terminal head form B, BUZ, BUZH, BBK
- Available with transmitter
JUMO Etemp B - Push-In RTD Temperature Probe with Form B Terminal Head for Standard Applications (902123)
- For temperatures from -50 to +400 °C
- With built-in measuring insert
- As single or double RTD temperature probe
- Terminal head form B or BUZ
- Available with transmitter
Push-in RTD Temperature Probe with Form J Terminal Head (902130)
- For temperatures from -50 to +400 °C
- As single or double RTD temperature probe
- Available with transmitter
- Protection class IP65
Push-in RTD Temperature Probe with Connecting Cable (902150)
- For temperatures from -50 to +400 °C
- As single or double RTD temperature probe
- In 2-wire circuit, 3-wire circuit, or 4-wire circuit
- Connecting cable PVC, silicone, PTFE, metal braiding
Push-in RTD Temperature Probe with Connecting Cable for Solar Thermal Systems (902153)
- For temperatures from -50 to +260 °C
- For collector and accumulator temperature measurement
- Long-term stability
- Cost-effective design for solar thermal systems
- Connecting cable made of PVC, PUR, silicone, or PTFE
Push-in RTD Temperature Probe with Bayonet Connection (902190)
- For temperatures from -50 to +400 °C
- With protection tubes made of various materials
- As single or double RTD temperature probe
- Good heat transfer through adjustable spring pressure
- Installation and removal without tools
Mineral-Insulated RTD Temperature Probes with Bare Connection Wires According to DIN EN 60751 (902210)
- For temperatures from -50 (-200) to +600 °C
- Flexible sheath cable with vibration-resistant measuring insert
- As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Quick response time
- Application-specific insertion length
Mineral-Insulated RTD Temperature Probe with Form B Terminal Head According to DIN EN 60751 (902210)
- For temperatures from -50 (-200) to +600 °C
- Flexible sheath cable with vibration-resistant measuring insert
- As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Quick response time
- Application-specific insertion length
Mineral-Insulated RTD Temperature Probe with Form J Terminal Head According to DIN EN 60751 (902210)
- For temperatures from -50 (-200) to +600 °C
- Flexible sheath cable with vibration-resistant measuring insert
- As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Quick response time
- Application-specific insertion length
Mineral-Insulated RTD Temperature Probe with LEMO Coupling According to DIN EN 60751 (902210)
- For temperatures from -50 (-200) to +600 °C
- Flexible sheath cable with vibration-resistant measuring insert
- As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Quick response time
- Application-specific insertion length
Mineral-Insulated RTD Temperature Probe with Connecting Cable According to DIN EN 60751 (902210)
- For temperatures from -50 (-200) to +600 °C
- Flexible sheath cable with vibration-resistant measuring insert
- As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Quick response time
- Application-specific insertion length
JUMO FOODtemp Insertion RTD Temperature Probe (902350)
- For temperatures from -50 to +260 °C
- Steam-tight and pressure-resistant
- High mechanical strength
- For use in the food industry
- Available with multiple measuring points
JUMO HEATtemp uvrtni otpornički termometar za brojač toplote sa priključnim kablom za direktnu ugradnju, tip DS/DL (902425)
- za temperature od 0 do 180°C
- odobrenje za brojač toplote MID- i nacionalno odobrenje kao zamjenske temperaturne sonde
- ispunjava uslove DIN EN 1434, AGFW 202 i FW 211
- odobrenje za brojač hladnoće i kombinovani brojač hladnoće i toplote
- uparivanje i deklaracija prema Njemačkom zavodu
- proizvodnja prema modulu D MID-a certificirana ( CE oznaka i oznaka metrologije)
JUMO HEATtemp Push-In RTD Temperature Probe for Heat Meters with Connecting Cable for Thermowells (Type PS/PL) (902435)
- For temperatures from 0 to 180 °C
- Type examination certificate for MID heat meters and domestic approval for cold meters as replaceable temperature probes
- Fulfills the requirements of DIN EN 1434, AGFW 202, and FW211
- Pairing and declaration of conformity in accordance with German Weights and Measures Act and MID
- Production certified according to module D (MID) (CE and metrology identification marking)
- Coordinated accessories for installation (data and price sheets 902440 and 902442)
JUMO HEATtemp – Push-In RTD Temperature Probes for Heat Meters with Terminal Head for Thermowells, Type PL (902437)
- For temperatures from 0 to 180 °C
- Type examination certificate for MID heat meters as replaceable temperature probes
- Approval for cold meters as well as combined cold and heat meters
- Fulfills the requirements of DIN EN 1434, AGFW FW 202, and FW 211
- Pairing and declaration of conformity according to MID
- Production certified according to module D (MID) (CE and metrology identification marking)
- Coordinated accessories for installation (data sheet 902440)
JUMO HEATtemp – Screw-In RTD Temperature Probe for Combined Cold and Heat Meters for Direct Mounting (Type DS/DL) (902455)
- For temperatures from 0 to 120 °C (cold) and 0 to 180 °C (heat)
- Type examination certificate for MID heat meters and domestic approval
for cold meters as replaceable temperature probes - Fulfills the requirements of DIN EN 1434, AGFW FW 202, and FW 211
- Pairing and declaration of conformity according to German Weights and Measures Act as well as MID
- Production certified according to module D (MID) (CE and metrology identification marking)
JUMO HEATtemp – Push-In RTD Temperature Probes for Combined Cold and Heat Meters with Terminal Head for Thermowells (Type PL) (902464)
• For temperatures from 0 to 120 °C (cold) and 0 to 180 °C (heat)
• Type examination certificate for cold meters and combined cold/heat meters
• Fulfils the requirements of DIN EN 1434, AGFW FW 202, and FW 211
• Pairing and declaration of conformity according to the German Weights and Measures Act and according to MID
• Production certified according to module D (MID) (CE and metrology identification marking)
• Adapted accessories for installation (data sheet 902440 and 902442)
Indoor and Outdoor RTD Temperature Probe (902520)
- For temperatures from -50 to +90 °C
- For application in air conditioning technology
- Protection type IP20 to IP65
- Connection available in two-wire, three-wire, or four-wire circuit
- Available with analog transmitter
Channel RTD Temperature Probe (902520)
- For temperatures from -50 to +200 °C
- For use in air-conditioning technology
- Protection type IP20 to IP65
- Connection available in two-wire, three-wire, or four-wire circuit
- Available with analog transmitter
Surface RTD Temperature Probe with Connecting Cable (902550)
- For temperatures from -50 to +260 °C
- With protection fittings made from various materials
- For round and flat surfaces
- Simple and quick installation
- Low thermal mass
- Good thermal transfer from the measuring point to the sensor
Surface RTD Temperature Probe (902550)
- For temperatures from -50 to +120 °C
- As a pipe-mounted probe or surface probe
- For round and flat surfaces
- Simple and quick installation
- Low thermal mass
- Good thermal transfer from the measuring point to the sensor
Test Equipment for Temperature and its Traceability / Pt100 Precision RTD Temperature Probe (902721)
- Pt100 precision RTD temperature probe
- For temperatures from -200 to +450 °C
- Test equipment calibrated by DAkkS (DKD – German calibration service)
- Measurement results are traceable to national standards
Test Equipment for Temperature and its Traceability / Temperature Measuring Chains (902721)
- Precision temperature indicating device
- Includes Pt100 precision RTD temperature probe
- Also available with thermocouple for higher temperatures
- USB interface
- Mains operation possible
- Test equipment calibrated by DAkkS (DKD – German calibration service)
- Measurement results are traceable to national standards
RTD Temperature Probe for the Food and Pharmaceutical Industry (902810)
- For temperatures from -50 to +250 °C
- Protection type up to IP69 according to DIN EN 60529 (IP69K according to DIN 40050)
- Hygienic process connections
- Stainless steel protection tubes
- Available with two-wire transmitter
- CIP-compliant installation
JUMO Dtrans T100 – Screw-In RTD Temperature Probe without/with Transmitter (902815)
- For temperatures from -50 to +260 °C
- Hygienic process connections
- RoHS conformity for EU and China
- Configuration with setup program via USB interface
- M12 × 1 plug connection; protection type IP67 according to DIN EN 60529
with pushed in machine connector
JUMO PROCESStemp RTD Temperature Probe for Process Technology with Ex Approval (902820)
- For temperatures from -200 to +600 °C
- With protection tubes made of stainless steel, titanium, tantalum, Inconel®, and HASTELLOY®
- Available with two-wire transmitter (4 to 20 mA/HART®) in Ex version
- II 1/2 G Ex ia IIC T6 ... T1 Ga/Gb¹
- II 1/2 D Ex ia IIIC T80 ... T400 °C Da/Db¹
- II 1/2 G Ex ia/d IIC T6 ... T1 Ga/Gb¹
- II 1/2 D Ex ia/tb IIIC T80 ... T400 °C¹
- With interchangeable measuring insert (not for Ex basic types)
¹ See description
ATEX/IECEx RTD Temperature Probe with Connecting Cable Acc. to DIN EN 60751 (902821)
- For temperatures from -100 to +600 °C
- As single, double, or triple RTD temperature probe in two-wire, three-wire, or four-wire circuit
- Shielded connecting cables (silicone, PTFE, metal braiding/glass fiber, PVC, PUR, FEP, RADOX®, BETAflam®)
- Application-specific design types
JUMO STEAMtemp Push-In RTD Temperature Probe in Steam-Tight Version (902830)
- For temperatures from -70 to +200 °C
- As single, double, or triple RTD temperature probe
- In two-wire, three-wire, or four-wire circuit
- Connecting cable PTFE, FEP, and silicone
Level and Temperature Probe for Utility Vehicles as Well as Construction and Agricultural Machinery (902880)
- For temperatures from -40 to +140 °C
- As level or combined level and temperature probe
- Connecting cable: cross-linked polyester
- Installation position: standing or suspended
- Measuring path of 50 mm or 62 mm
JUMO CANtrans T RTD Temperature Probe with CANopen Output (902910)
- For temperatures from -50 to +450 °C
- As single or double RTD temperature probe
- Vibration-resistant design
- Limit value monitoring
- Setting via customary CANopen software tools
JUMO Wtrans T - RTD Temperature Probe with Wireless Data Transmission (902930)
- For stationary and mobile measurements
- Measuring ranges: -30 to +260 °C or -200 to +600 °C
- Radio frequency: 868.4 MHz or 915 MHz
- Also available with ATEX approval
- Open air range up to 300 m
- Configurable transmission interval (1 to 3600 s)
JUMO Wtrans Receiver - Universal Receiver for JUMO Wireless Measuring Probes (902931)
- Universal receiver for JUMO wireless measuring probes
- In combination with corresponding transmitter for RTD temperature probes, thermocouples, resistance/potentiometer, voltage input, or pressure measurement
- For up to 16 transmitters per receiver (can be freely combined)
- RS485 interface with Modbus protocol
- Up to four analog outputs/up to two switching outputs (relay)
JUMO DELOS T – Electronic Temperature Switch with Display and Analog Output (902940)
- For temperatures from -50 to +260 °C (500 °C)
- Hygienic process connections
- Configuration performed with the rotary encoder on the temperature switch or setup program
- M12 × 1 plug connector; protection type IP67 according to DIN EN 60529 with pushed in machine connector
- Positively lit LCD display
JUMO dTRANS T1000 – Temperature Sensor with IO-Link (902915)
- Small, compact, robust
- High degree of accuracy
- Various process connections
- Simple startup
- Easy sensor replacement
JUMO HEATtemp – Screw-In RTD Temperature Probe for Heat Meters with Terminal Head for Direct Mounting (Type DL) (902427)
- For temperatures from 0 to 180 °C
- Type examination certificate for MID heat meters as replaceable temperature probes
- Fulfills the requirements of DIN EN 1434, AGFW FW 202, and FW 211
- Pairing and declaration of conformity according to MID
- Production certified according to module D (MID) (CE and metrology identification marking)
