Above all the JUMO dTRANS T06 Ex multifunctional four-wire transmitter is characterized by its high level of safety. The multipurpose unit of the brand JUMO Safety Performance allows the establishment of safe temperature measuring chains (SIL 2 or 3), which allow the temperature sensor to be used in Ex zone 0.
| general technical data | |
|---|---|
| Galvanic isolation | 1.8 kV |
| Installation | Mounting rail 35 mm × 7.5 mm according to DIN IEC 60715 |
| RTD temperature probe input | Pt50, Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu50, Cu100, two/three/four-wire circuit |
| Thermocouple input | L, J, U, T, K, E, N, S, R, B, C, A1, D, L, Chromel® Alumel®, PLII, 0 to 1 V |
| Ambient temperature | -10 to +70 °C |
| Output | 0(2) to 10 V or 0(4) to 20 mA (invertible) |
| Special features | Universal input for a number of sensors and standard signals, intuitive operation and configuration on the device or via USB interface with setup program, RS485 interface with Modbus RTU, intelligent additional functions such as min/max drag indicator, operating hours counter and output simulation SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to ISO 13849, Ex approval according to ATEX and IECEx, sensor matching for RTD temperature probe, customer-specific linearization, high degree of galvanic signal separation, connection diagram available in the display |
| NAMUR compliant | NE 43 |
| Voltage supply | DC 24 V (four-wire transmitter) |
| Calibration accuracy | ± 0.05 % |
| Configuration | On the device via USB interface with PC setup program |
| Approval | SIL and PL, ATEX and IECEx |
655.26 KB, English
7/3/2020
1.96 MB, English
3/31/2020
58.76 MB, German, English, Spanish, French
Version: 349.03.xx/3.00J
,
Datum: 7/14/2021
118.12 KB, English
Datum: 5/27/2020
1.33 MB, English
11/24/2020
443.83 KB, English
7/12/2024
736.07 KB, English
5/10/2023
661.5 KB, English
Datum: 4/11/2023
We will assist you with your project and provide you with an offer tailored to your personal needs.
Team Sales
We care about your problems and will find solutions for you. We are also the contact persons for startup, repair, maintenance and calibration.
Team Service
